Rotary shear cut to length line introduction
1, Raw material specification
| 1, Coil width: 200-800mm | 2, raw material: SS, GAL, COPPER | 3, Coil weight: 8-15T |
| 4, Coil ID: 508/610MM | 5, Line speed: 60m/min | 6, Control system: Siemens/ABB |
| 7, Drive: AC or DC | 8, Machine color: green | 9, monthly production ability: 1800-3000 T |
2, Machine composition
| 1, Coil loading car | 2, hydro decoiler | 3, Pinch roller, leveler | 4, loop bridge#1 |
| 5, Guider | 6, NC length measure | 7, hydraulic shear | 8, belt conveyor |
| 9, auto lift stacker | 10, Lubricate, pneumatic | 11, hydraulic system | 12, electric system |
3, Details picture and description for each unit
(1) Coil loading car with saddle
Used to loading coil to decoiler mandrel, leveling working in
rails, vertical lift power from cylinder, v type saddle
(2) hydraulic decoiler
Used to hold the coil, then open coil, feeding coil to next step,
expansion and contractive by hydrualic power through wedge
(3) Pinch roller, levele
Pinch roller used to pinch sheet to loop bridge, drive from motor
power
(4) Fine leveler with 6 hi
this adopts best quality in 19 rollers 6 HI leveler, to keep sheet
in top flatness
(5) Loop bridge#1
Used to storage the enough coil to keep line working in best
condition, also help to coodinate with each parts speed micro
different, have sensor inside the pit to adjust each parts working
speed in same
(6) fly shear
Used toshear the sheet according to PLC set data, it has two mode,
from upper to down, and down to upper cutting, driven by motor or
cylinder, speed can reach 80m/min
(8) Belt conveyor (two sets)
used to conveying sheets to stacker, the belt is durable
(9) auto lift stacker (two sets)
Used to stack the sheets to pallets, the power from motor and
pneumatic system
under the stacker has move out roller table system, mostly have 2
sets, it has left& right out system, also has rear side out sistem.
as per customer factory requirements
(11) hydraulic system
Used to offer hydraulic power for all hydraulic unit
(12) Pneumatic system
Used to offer pneumatic power for decoiler, recoiler etc other unit
(13) Lubricate system
Used to lubricate all required area, to make it working smoothly,
some parts should be greasing manually
(14) Electric system
Used to control full line working condition, it has screen display,
PLC, and button control together
| Technical parameters of flying shear unit |
| Model | 850 | 1250 | 1600 | 1850 |
| Processing Material | Cold-rolled steel coil,Galvanized coil,Cold-coated coil,Stainless
steel coil etc. |
| Processing sheet thickness | 0.3mm-2.0mm | 0.3mm-2.3mm | 0.5mm-3.0mm | 0.5mm-3.0mm |
| Processing sheet witdth | 850mm(MAX) | 1250(MAX) | 1600(MAX) | 1850(MAX) |
| Weight | 8ton(MAX) | 15ton(MAX) | 20ton(MAX) | 20ton(MAX) |
| Cutting Accuracy | Cutting±0.3,Acc/decelerate±0.5 |
| Line speed | 80m/min-100m/min |
| Note: The above standards are for reference only, and parameters
can be determined according to customer needs. |
Note: The above standards are for reference only, and parameters
can be determined according to customer needs.
Packaging & Shipping
We use standard packing for all steel coil slitting lines.
a) Sea transportation, Land transportation, and so on.
b) Please choose your convenient shipping method according your detail
requirement.
c) The shipping freight is different based on different season; we
will choose best and safest way according to your demand.
Delivery time:
a) Delivery time is 60-180 working days based on different machines
b) ODM 60-150 days after all info confirmed.
c) Depends on order quantity on hands
d) According to real production situation, appointment time of
delivery.
Why choose us?
----We have two designing systems for different setting and
quality, One system is from top senior engineer based on Taiwanese
design. The other system is based on popular design for high
quality with competitive price. It depends on customers’ production
requirements and accuracy.
----We have after-sale service in Argentina and India. It can serve
customers in or nearby Argentina or India. We keep doing our best
to provide best quality machinery and best service to our esteemed
customers.
Difference from Wuxi?
---- All of our mechanical parts has been processed by heat
treating, tempered and quenched. re-grinding the shaft after first
time grinding.
---- Use better quality raw material
--- -All electronic components are from International or Chinese
famous original parts, not fake brand
